Sales and Specials on Crown Molding Explained

It’s important to provide a step-by-step guide when installing crown moulding to ensure that everything goes smoothly. Keep in mind that the most fruitful installation phase is one in which all participating participants are aware of the whole process from start to finish. offers excellent info on this.

Make sure you prepare ahead of time while you’re working on a home improvement project. If you don’t prepare ahead of time, crown moulding installation can be daunting and time consuming. You must first decide on your style. What is the size of the space in which the mouldings will be installed? You’ll need to measure your space to figure out how much crown moulding you’ll need.

Be sure to purchase a little more crown moulding than you need to account for waste and mistakes. It should be enough to add about 10% to the crown molding’s entire length. If you’ve bought the crown moulding, make sure to keep it in a dry, well-ventilated area inside. Placing the crown moulding in the space where it will be mounted 72 hours before installation is recommended. This allows the moulding to adapt to the ambient temperature. If you want to paint your crown moulding, do so before installing it.

There are a few important resources you’ll need to complete a good installation project. Clean cloth (to clean/prepare walls and moulding for installation), caulking gun (to adhere moulding to wall/ceiling), mitre box/saw (to create quality cuts for moulding), chalk/pencil (to mark walls for moulding installation), hammer/finishing nails are some of the tools you’ll need (extra support for crown molding).

Ensure that you follow sound building practises and adhere to all safety procedures throughout the installation process.

Make a chalk line on your wall to show where the bottom edge of the moulding will touch the wall. Often begin your moulding installation behind a closed door to cover the moulding joints.

Make a second measurement of your walls whenever you begin the installation process. This will allow you to check the length of the wall and cut the moulding accordingly. You’ll need a mitre saw to join your crown moulding to the wall. When using a mitre saw, keep in mind that the ceiling edge of the moulding should be against the bottom of the box or saw, and the wall edge should be against the site opposite of your work. Before you affix the moulding to the wall, make sure you put the two pieces of moulding together to ensure proper fit.

Powered by WordPress | Designed by Elegant Themes | Provided by Zazavy